How to Prevent a Toilet Flooding Emergency?
When your toilet is on the verge of overflowing, prevent toilet flooding and sewage gushing out onto the bathroom floor with the following steps:
Removing Water From Toilet Flooding Emergency
- Remove toilet lid from tank and gently place it on toilet bowl or floor. The lid is breakable so be careful not to slam it down on the floor.
- If you have time, place newspapers on floor around toilet to catch any sewage splatters.
- To prevent water from going into the toilet bowl and thus prevent sewage overflow onto the bathroom floor, press down the rubber flapper valve, located in the middle bottom area of the tank. This valve allows the toilet tank to release water into the toilet bowl.
- Continue to hold the toilet tank float up as the water keeps descending to its regular level.
- At that point, you can release the toilet tank float and you will see that the toilet bowl refills normally without any water or sewage overflows onto the bathroom floor.
- In case the water in the toilet tank does not descend, shut off the toilet water supply valve behind the toilet, while still holding the toilet tank float.
- Do not force the toilet supply valve as it could break and cause a water leak in addition to your toilet blockage.
- In case you cannot shut off the toilet fill valve, take off the small cylinder that gets water to the toilet bowl and point it into the toilet tank instead. This should be easy since the cylinder is flexible plastic or rubber.
- At this point, you can release the toilet tank float and watch the tank fill with water. Once the toilet tank is full, you can release the cylinder back into its regular position.
- At this point, find out if there is a clogged house drain that could cause toilet flooding.
- Do not use any water outlets in the house, such as toilets, showers, baths, kitchen sinks, etc.
- Wear old clothes, rubber gloves and rubber boots or old closed toe shoes you can discard in case toilet water splashes on you.
- Check all bathrooms in the house starting with lower level toilets and bathrooms and moving to upper level bathrooms. As you check the upper level toilets and bathrooms, make sure there is another person on the lower level to give feedback on drain backups on lower levels.
- Use toilet plunger to attempt clearing a blocked drain. If sewage rises in a bathtub drain, close the drain and continue to use the toilet plunger.
- In case there is just a single clogged toilet, use the other toilets and avoid using the clogged one until you call a plumber.
- In case there are multiple toilet backups, there may be a blockage at the main drain (if your home is connected to municipal sewer) or flooded septic system (check to see that all components in system are on and working), in which case, try to use water sparingly until problem is resolved.
- Call a plumber or water damage restoration service company to fix the backup problem.
Toilet Flooding Prevention Dallas Fort Worth
When your toilet is on the verge of overflowing, prevent toilet flooding and sewage gushing out onto the bathroom floor with the following steps:
Removing Water From Toilet Flooding Emergency
- Remove toilet lid from tank and gently place it on toilet bowl or floor. The lid is breakable so be careful not to slam it down on the floor.
- If you have time, place newspapers on floor around toilet to catch any sewage splatters.
- To prevent water from going into the toilet bowl and thus prevent sewage overflow onto the bathroom floor, press down the rubber flapper valve, located in the middle bottom area of the tank. This valve allows the toilet tank to release water into the toilet bowl.
- Continue to hold the toilet tank float up as the water keeps descending to its regular level.
- At that point, you can release the toilet tank float and you will see that the toilet bowl refills normally without any water or sewage overflows onto the bathroom floor.
- In case the water in the toilet tank does not descend, shut off the toilet water supply valve behind the toilet, while still holding the toilet tank float.
- Do not force the toilet supply valve as it could break and cause a water leak in addition to your toilet blockage.
- In case you cannot shut off the toilet fill valve, take off the small cylinder that gets water to the toilet bowl and point it into the toilet tank instead. This should be easy since the cylinder is flexible plastic or rubber.
- At this point, you can release the toilet tank float and watch the tank fill with water. Once the toilet tank is full, you can release the cylinder back into its regular position.
- At this point, find out if there is a clogged house drain that could cause toilet flooding.
- Do not use any water outlets in the house, such as toilets, showers, baths, kitchen sinks, etc.
- Wear old clothes, rubber gloves and rubber boots or old closed toe shoes you can discard in case toilet water splashes on you.
- Check all bathrooms in the house starting with lower level toilets and bathrooms and moving to upper level bathrooms. As you check the upper level toilets and bathrooms, make sure there is another person on the lower level to give feedback on drain backups on lower levels.
- Use toilet plunger to attempt clearing a blocked drain. If sewage rises in a bathtub drain, close the drain and continue to use the toilet plunger.
- In case there is just a single clogged toilet, use the other toilets and avoid using the clogged one until you call a plumber.
- In case there are multiple toilet backups, there may be a blockage at the main drain (if your home is connected to municipal sewer) or flooded septic system (check to see that all components in system are on and working), in which case, try to use water sparingly until problem is resolved.
- Call a plumber or water damage restoration service company to fix the backup problem.
5
4
